Filter Sizing: Calculating Clean Element Delta P

Posted by Jim Harlan on Wed, Nov. 19, 2014
Find me on:

filter elements and differential pressureChoosing the best filter element size and media for a specific application can be tricky. You want media that is tight enough to help you reach your target ISO code. However, if you choose a media that is too tight for your application, the element differential pressure (Delta P or ΔP) will rise too quickly and you will be replacing elements far too frequently.

To prevent these situations you should always calculate clean element Delta P whenever changing the filter media or manufacturer.

Step 1: Gather Necessary Information

Before you start, you'll need to gather a few pieces of essential information. They are:

  1. Flow rate

  2. Lowest temperature
    What is the lowest temperature this oil will reach during shutdown, transfer, etc? (This will be used to calculate maximum viscosity in centistokes.)

  3. Specific gravity of the fluid

  4. Filter element ΔP factor

Step 2: Viscosity Chart Calculations 

Use a viscosity chart to calculate the maximum viscosity of the fluid at its lowest temperature in centistokes.

Step 3: Calculate the Delta P 

Use the information you have gathered to solve the equation below for clean element Dp.

Clean Element Dp

 

And that should be it for calculating your clean element Delta P. If you have any questions, please let us know if the comments below. 


 

New Call-to-action

 

Topics: hydraulic fluid, filter sizing, filter elements

  

Subscribe via E-mail

Popular Posts